Step 8) The addresses of the digital input module vary from byte zero to byte number one means that the addresses we will use for our program in this module begin at “I 0.0” for the first input and proceed to “I 1.7” for the final input. We can add the remaining modules in this way. We need to select “316 CPU”, so we have to open the “CPU 316: folder and select the appropriate part number to insert it into the slot second in the rack. To select the desired module, we open this “CPU 300” folder, which opens to reveal all types of “300 CPUs”. Step 7) In the second slot of the rack, we often mount the “CPU” module. To do this, we open the “PS300” folder and double-click on these two amber power supplies to insert them into the first slot of the rack. Step 6) To power on and turn on our PLC modules we need to connect a “Power Supply” in the first slot. To attach the rack, open the “Rack 300” and double click the “Rail” to connect it to the left pane. Step 5) First of all, we need a rack in which the modules are mounted. Here we are using “S7 300” PLC so we have to select the desired modules from “SIMATIC 300” subgroup. Step 4) Then Click on “Simatic 300” and it takes us to the hardware so that we can configure the modules we need for the PLC. SIMATIC STEP 7 Basic (TIA Portal) is the price-optimized subset of STEP 7 Professional software that can be used both for engineering the SIMATIC S7-1200 Basic Controllers and for configuring the SIMATIC HMI Basic Panels, because WinCC Basic is part of the software package.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |